Accessories
Accumulators
Cylinders
Filtration
Industrial Valves
Mobile Valves
Power Units •••••
Pumps
Motors
Hydr-App - Division of Brevini Fluid Power
MR series micro power unit
~ Pressure balanced gear pumps, from 0.02 to 0.08 cu. in./rev
~ Maximum pressure: up to 3190 PSI
~ Threaded ports
~ DC electric motors from 350 W (0.25 HP) to 2.2 kW (3.0 HP) - 12 and 24 VDC
~ AC electric motors from 0.25 – 1.5 HP in single or three phase design
~ Lowering device with 2-way, 2-position solenoid valves or progressive manual control
~ Plastic or metal tanks from 0.13 – 6.6 gallon
~ Possibility to mount stackable blocks for CETOP 2 and CETOP 3 solenoid valves
~ Possibility to mount hand pumps for emergencies
~ Possibility to integrate fixed compensated throttle valves
~ Horizontal or vertical mounting
MW & TPS series “reversible” micro power units
~ Pressure balanced gear pumps from 0.02 to 0.08 cu. in./rev
~ Maximum pressure: up to 3190 PSI
~ Threaded ports or manifold mounting capability
~ DC electric motors from 350 W (0.25 HP) to 2.2 kW (3.0 HP) - 12 and 24 VDC
~ Emergency Manual override connection included on 1.6 HP- 12 and 24 VDC motor
~ AC electric motors from 0.25 – 1.5 HP in single or three phase design
~ Low pressure discharge of excess differential cylinder flow valve options
~ Emergency manual override valves on A & B ports
~ Plastic or metal tanks from 0.13 – 6.6 gallon
~ Horizontal or vertical mounting
MC series miniature power unit
~ Pressure balanced gear pumps, from 0.02 to 0.60 cu. in./rev
~ Maximum pressure: up to 4200 PSI
~ Threaded ports and manifold mounting capability
~ DC electric motors from 350 W (0.25 HP) to 4 kW (3.0 HP) – 12, 24, 48 & 96 VDC
~ AC electric motors from 0.25 – 5 HP in single or three phase design
~ Single phase “anti-stall” start valve & “anti-jump” soft start valve options
~ Directional valves 2-way/2-position solenoid & manual control, pressure compensated flow controls
~ Plastic or metal tanks up to 6.6 gallon
~ Possible to mount stackable blocks for CETOP 3 solenoid valves
~ Possible to mount hand pumps for emergencies
~ Possible to integrate fixed and adjustable compensated throttle valves
~ Horizontal or vertical assembly
FP series miniature power unit
~ Pressure balanced gear pumps, from 0.02 to 0.60 cu. in./rev
• High-low pumps
• Tandem pumps
~ Maximum pressure: up to 4200 PSI
~ Threaded ports and manifold mounting capability
~ DC electric motors from W (0.25 HP) to 2.2 kW (3.0 HP) – 12, 24, 48 & 96 VDC
~ AC electric motors from 0.25 – 5 HP in single or three phase design
~ Single phase “anti-stall” start valve & “anti-jump” soft start valve options
~ Integral directional valves 2-way/ 2-pos. and 4-way/2 pos. solenoid valves, pressure comp. flow controls
~ Plastic or metal tanks up to 6.6 gallon
~ Possible to mount stackable blocks for CETOP 3 solenoid valves
~ Possible to mount hand pumps for emergencies
~ Possible to integrate fixed and adjustable compensated throttle valves
~ Horizontal or vertical mounting
VT series miniature power unit
~ Pressure balanced gear pumps, from 0.02 to 0.60 cu. in./rev
• High-low pumps
~ Maximum pressure: up to 4200 PSI
~ Threaded ports and manifold mounting capability
~ DC electric motors from W (0.25 HP) to 2.2 kW (3.0 HP) – 12, 24, 48 & 96 VDC
~ AC electric motors from 0.25 – 5 HP in single or three phase design
~ Single phase “anti-stall” start valve & “anti-jump” soft start valve options
~ Integral directional valves 4-way/ 2-pos. and 4-way/ 3 pos. solenoid valves
~ Plastic or metal tanks up to 6.6 gallon
~ Horizontal or vertical mounting
MH series power unit
~ Pressure balanced gear pumps, from 0.25 to 1.53 cu. in./rev
~ Maximum pressure: up to 3626 PSI
~ Threaded ports and manifold mounting capability
~ AC electric motors from 0.25 – 20 HP in single or three phase design
~ Single phase “anti-stall” start valve & “anti-jump” soft start valve options
~ Directional valves 2-way/2-position solenoid & manual control, pressure compensated flow controls
~ Plastic or metal tanks up to 60 gallon
~ Possible to mount stackable blocks for CETOP 3 & CETOP 5 solenoid valves
~ Possible to mount hand pumps for emergencies
~ Possible to integrate fixed and adjustable compensated throttle valves
~ Vertical mounting
CMI series “Submersible motor‐pump” power unit
~ Pressure balanced gear pumps, from 0.25 to 1.53 cu. in./rev
• External gear
• Incline gear
• Helical rotor
~ Maximum pressure: up to 3626 PSI
~ Manifold mounting allowing for expansive circuit design
~ Submersible AC electric motors from 0.25 – 5 HP in single or three phase design
~ Single phase “anti-stall” start valve & “anti-jump” soft start valve options
~ Metal tanks up to 20 gallon
~ Horizontal mounting
FEATURES
This version offers the following advantages as compared with an external motor mounted power unit.
- Motor-pump set completely oil submersed inside the tank.
- Reduced dimensions especially the height so that the unit is extremely compact
- High use of the motor power due to the cooling capacity of the oil
- Reduced noise level thanks to oil muffle action, absence of the cooling fan and presence of vibration-dampeners on
which the motor-pump set is positioned
MK series miniature “Dock Leveler” power unit
~ Two standard “Dock Leveler” circuit configurations available
~ Pressure balanced gear pumps, from 0.07 to 0.26 cu. in./rev
~ Maximum pressure: up to 4200 PSI
~ Threaded ports
~ AC electric motors from 0.25 – 5 HP in single or three phase design
~ Plastic or metal tanks up to 6.6 gallon
~ Horizontal or vertical assembly
EP & MP series pump/motor units
~ Pressure balanced gear pumps, from 0.02 to 0.37 cu. in./rev
~ Maximum pressure: up to 3190 PSI
~ DC electric motors from W (0.25 HP) to 2.2 kW (3.0 HP) – 12, 24, 48 & 96 VDC
~ Integral mounting feet
International Fluid Power, Inc. – Custom Power Units
~ Capabilities ranging from fractional horsepower to heavy duty industrial & mobile requirements
~ AC and DC electric motors to meet virtually any requirement
~ Engine driven solutions per specification
~ Standard and custom reservoirs and accessories
~ Pump configurations to include‐ piston, vane, helical rotor, external, internal & incline gear, and triple screw designs
~ Control valve options to include proportional, solenoid, mechanical and manual designs
~ Control options from complete panels, wireless systems, on‐off or simply prepared for connection at your facility.
~ Complete range of filtration and cooling options
